Most temperature and humidity problems in stores, cold rooms, server rooms and labs are not measurement problems at all. They are notification problems: the chiller tripped on Friday night, the AC failed during load-shedding, or the dehumidifier stopped, and nobody knew until the stock, the samples or the equipment had already suffered (general). A wall thermometer or a logger that is only downloaded once a week records the excursion, but it does not tell anyone while there is still time to act (general).
This note looks at the Lascar Wireless Alert PRO THP (WA-PRO-THP), a Wi-Fi temperature and humidity limit alert sensor from the FilesThruTheAir Wireless Alert PRO range, together with the high-accuracy WA-PRO-THP+ and the temperature-only WA-PRO-T+. It covers what the datasheets say, how the alerts work, how to install the sensors in Pakistani sites, and when an EasyLog data logger is the better fit. Figures come from the Wireless Alert PRO datasheets hosted on our product pages and the current Tetracon product pages. General engineering advice is labelled as general, and nothing here goes beyond the published data. Tetracon (Pvt.) Ltd. is the sole authorized agent for Lascar Electronics Ltd. in Pakistan.
Why a limit alert sensor
- It tells you when a limit is breached. The WA-PRO-THP pushes alert notifications to your smartphone or sends them by email when user-selected high and low temperature or humidity limits are breached (datasheet).
- High and low limits for both values. Alert limits are user-configurable within the measurement range, -30 to +80 °C and 0 to 100 %RH for the THP (datasheet), so one sensor can watch for a too-warm and a too-cold store, or a too-damp and a too-dry room (general).
- Scheduled status reports. Emailed scheduled summary reports give the minimum, maximum and average readings, power status, number of alerts and total time spent in alert (datasheet), which is a useful weekly check for a store manager (general).
- One dashboard for every site. The FilesThruTheAir app dashboard shows the alert status and last reported reading of every device connected to your account (datasheet).
- Simple to set up. The sensor is powered from its USB-C socket and set up with the free FilesThruTheAir app, including the Wi-Fi network, the alert limits and the notification options; a flashing alert indicator on the unit shows an alert locally (datasheet).
WA-PRO-THP at a glance
| Item | Lascar WA-PRO-THP (datasheet) |
|---|---|
| Temperature range | -30 to +80 °C (-22 to +176 °F) |
| Temperature resolution | 0.1 °C |
| Temperature accuracy | ±0.3 °C typical (+5 to +60 °C); ±0.8 °C maximum (-20 to +60 °C) |
| Humidity range | 0 to 100 %RH, 1 %RH resolution |
| Humidity accuracy (at 25 °C) | ±2 %RH typical (20 to 80 %RH); ±5 %RH maximum (0 to 100 %RH) |
| Alert levels | User-configurable high and low limits within the measurement range |
| Response time | 1 minute |
| Alerts and reports | Push notifications via the FilesThruTheAir app, email alerts, scheduled summary reports |
| Wi-Fi | 802.11b/g/n (2.4 GHz); WPA2/WPA3 Personal, WPA2 Enterprise (MSCHAP/PEAP, TTLS) |
| Power supply | USB-C 5 V, 1.0 A |
| Device operating temperature | -20 to +60 °C (-4 to +140 °F) |
| Dimensions | Unit 61 x 29 x 13 mm; probe 37 x 12 x 8 mm (without bracket) on a 2000 mm cable |
| In the box | WA-PRO-THP sensor, mounting bracket and fixing screws, quickstart guide, 2 m USB-C cable |
| Accessories | EL-SP-TH replacement probe, USB power supply, calibration certificate (WA-PRO-THP CAL); a UPS / backup battery is listed as coming soon |
The datasheet notes that the sensor is protected in storage and transit by a peelable protective film, which must be removed before the device is used (datasheet).
THP, THP+ or T+
- WA-PRO-THP: temperature and humidity on a remote probe with a 2 m cable, -30 to +80 °C, ±0.3 °C typical, ±2 %RH typical (datasheet). The general-purpose choice for stores, rooms and cabinets (general).
- WA-PRO-THP+: the high-accuracy version with the same ranges and 2 m probe, 0.01 °C resolution, ±0.2 °C typical (+5 to +60 °C) and ±1.8 %RH typical (20 to 80 %RH), ±4 %RH maximum (datasheet). Worth it where the tolerance band is tight, such as archives, museums or controlled stores (general).
- WA-PRO-T+: high-accuracy ambient temperature only, -20 to +60 °C, 0.01 °C resolution, ±0.15 °C typical (0 to +60 °C) and ±0.21 °C maximum (-20 to +60 °C), with the probe extending 13.5 mm beyond the device body (datasheet). Use it where humidity does not matter and the whole unit can sit in the monitored space (general).
The wider Wireless Alert PRO range on the datasheets also lists temperature-probe, thermocouple, vaccine and 4–20 mA versions, some marked as coming soon (datasheet). Ask us for availability before you specify them.
Installing it in a Pakistani site
- Put the probe where the risk is. On the THP and THP+ the probe sits on a 2 m cable (datasheet), so it can go inside a cabinet, chiller or store while the unit stays outside (general). Keep the unit itself within its -20 to +60 °C operating range (datasheet).
- Check the Wi-Fi at the mounting point. The sensor uses 2.4 GHz 802.11b/g/n Wi-Fi (datasheet). Steel cold-room panels, basements and plant rooms weaken the signal, so test the coverage with a phone before fixing the bracket, and add an access point if needed (general).
- Use the corporate network if you have one. WPA2 Enterprise (MSCHAP/PEAP, TTLS) is supported as well as WPA2/WPA3 Personal (datasheet), which suits hospital, university and office networks where IT does not allow a shared password (general).
- Plan for load-shedding. The sensor runs from USB-C 5 V, 1.0 A (datasheet). In Pakistan, power it, and the router it reports through, from a UPS-backed socket so that a power cut does not silence the alerts exactly when the room starts to warm up (general). The scheduled summary report includes power status (datasheet).
- Peel the film. Remove the protective film from the sensor before use (datasheet); a sensor left covered reads slowly and wrongly (general).
Setting alert limits that mean something
- Set limits from the product, not the room. Use the storage condition on the product label, SOP or equipment manual as the high and low limit, for example 2 to 8 °C for refrigerated medicines or below 60 %RH for a dry store (general).
- Allow for the 1-minute response. The datasheet gives a 1-minute response time (datasheet). Brief door openings can still trip a tight limit, so set the limit with a small margin from the normal operating point (general).
- Send alerts to more than one person. Route push and email notifications to the duty supervisor and a backup, so that a night-time alert is not missed by one person on leave (general).
- Read the weekly report. The scheduled summary shows minimum, maximum and average readings, the number of alerts and total time in alert (datasheet). A store that spends more time in alert every week usually has a failing compressor, door seal or AC unit (general).
Where it fits in Pakistan
- Pharmacy, hospital and food stores. Cold chain and storage, laboratories, and pharma and food are listed applications on the product page (product page). Summer temperatures in Pakistan make an AC or chiller failure in a store an expensive event (general).
- Server rooms and telecom shelters. Occupied spaces, storage areas and facilities management are listed (datasheet, product page). A high-temperature alert on a phone gives IT staff time to act before equipment shuts down (general).
- Archives, museums and offices. Museums and exhibitions, and housing and business premises, are listed for the THP+ (product page). Humidity swings during the monsoon are a common risk for paper, textiles and artefacts (general).
- Agriculture, animal welfare and horticulture. Agriculture and horticulture, and veterinary and animal welfare, are listed for the THP+ (product page), for example seed stores, hatchery rooms and greenhouses (general).
When an EasyLog data logger is the better fit
The Wireless Alert PRO range is built for limit alerts and summary reports (datasheet). Where an audit, an inspection or a quality system needs a continuous record of every reading, a data logger is the better tool (general).
- Lascar EL-WiFi-TH+: high-accuracy Wi-Fi temperature, humidity and dew point data logger, -20 to +60 °C and 0 to 100 %RH, uploads to EasyLog Cloud, stores data if Wi-Fi is temporarily lost, with email and SMS notifications (product page). See our EL-WiFi-TH+ note.
- Lascar EL-WiFi-VACX: Wi-Fi vaccine monitoring kit with a glycol-filled probe, onboard sounder and LED alarm, a calibration certificate at 2 °C and 8 °C, and BS EN 12830:2018 compliance (product page). See our vaccine cold-chain note.
- Lascar EL-USB-2-LCD+: standalone USB temperature and humidity logger, -35 to +80 °C and 0 to 100 %RH, over 16,000 readings, with an on-board display and free EasyLog software (product page), where there is no Wi-Fi at all.
- Regulated pharma records. For 21 CFR Part 11 work, see our Lascar EasyLog 21CFR note.
Related products
| Need | Product | Key point |
|---|---|---|
| Temperature and humidity alerts on your phone | Lascar WA-PRO-THP | -30 to +80 °C, 0 to 100 %RH, 2 m probe, push and email alerts (datasheet) |
| Tighter tolerance alerts | Lascar WA-PRO-THP+ | ±0.2 °C and ±1.8 %RH typical, 0.01 °C resolution (datasheet) |
| Temperature-only room alerts | Lascar WA-PRO-T+ | -20 to +60 °C, ±0.15 °C typical (datasheet) |
| Wi-Fi logging to the cloud | Lascar EL-WiFi-TH+ | Temperature, humidity and dew point to EasyLog Cloud (product page) |
| Vaccine fridges | Lascar EL-WiFi-VACX | Glycol probe, sounder alarm, 2 °C / 8 °C calibration (product page) |
For more background, read our pharma cleanroom humidity and temperature note. The wider range is on the Environmental Monitoring and Humidity & Pressure category pages, our selection guides and the Lascar Electronics manufacturer page.
What to send with an enquiry
- What you are protecting (medicines, food, samples, IT equipment, documents, animals or plants) and the temperature and humidity limits it needs.
- The number of rooms, fridges, cabinets or stores, and whether you need humidity as well as temperature.
- The Wi-Fi network at each point (home or business router, or a corporate WPA2 Enterprise network) and whether there is signal at the mounting point.
- Whether you need only alerts, or a full record for audits and inspections.
- Whether you need calibration certificates with the sensors.
Send these to Tetracon and our engineers will confirm the right model and lead time. Our services team in Islamabad supports installation and commissioning across Pakistan.
FAQ
What does the Lascar WA-PRO-THP do?
It is a Wi-Fi temperature and humidity limit alert sensor. When user-selected high or low limits are breached it sends push notifications through the FilesThruTheAir app or email alerts, and it can also email scheduled summary reports (datasheet).
What are its measurement ranges and accuracy?
-30 to +80 °C with ±0.3 °C typical accuracy (+5 to +60 °C), and 0 to 100 %RH with ±2 %RH typical accuracy (20 to 80 %RH) at 25 °C (datasheet). The WA-PRO-THP+ improves this to ±0.2 °C and ±1.8 %RH typical (datasheet).
How is the WA-PRO-THP powered and connected?
It is powered from a USB-C socket at 5 V, 1.0 A and connects to 2.4 GHz 802.11b/g/n Wi-Fi with WPA2/WPA3 Personal or WPA2 Enterprise security (datasheet).
Is the WA-PRO-THP a data logger?
It is designed as a limit alert sensor with scheduled summary reports of minimum, maximum and average readings, alert count and time in alert (datasheet). Where a full record of readings is required, an EasyLog logger such as the EL-WiFi-TH+ is the better fit (product page).
Who supplies Lascar Wireless Alert PRO sensors in Pakistan?
Tetracon (Pvt.) Ltd., Islamabad, is the sole authorized agent for Lascar Electronics Ltd. in Pakistan and supplies the Wireless Alert PRO range with local technical support. Contact us with your rooms and limits for a quotation.
Protecting a store, cold room, server room or lab in Pakistan? Contact Tetracon with the limits and the number of points. You can also browse the WA-PRO-THP product page and the Lascar Electronics manufacturer page, or the full product catalogue and all manufacturers.
